Maintaining a healthy water balance is essential for producing high quality plants. Under-watered plants suffer from nutrient deficiencies, stunting and wilting. Conversely, over-watered plants are more susceptible to disease pressure and less tolerant of dry conditions later on in their life cycle. Extreme over-watering will suffocate the plant and lead to root death.
The WaterScout SMEC300 Soil Moisture Sensor is a combination sensor using Time Domain Multiplexing technology to measure not only Soil Moisture (%VWC), But also Soil Conductivity (EC in mS/cm¹) and the Soil Temperature (°C). The WaterScout SMEC300 is the most advanced sensor in our portfolio and can be used in combination with most of our FieldGuard Stations.
Specifications:
Range Soil Water Content : 0 %VWC to saturation
Range Soil Conductivity : 0 to 10 ms/cm¹
Range Soil Temperature : 0.5°C to 80°C
Resolution Water Content : 0.1% VWC
Resolution Conductivity : EC 0.01 ms/cm¹
Resolution Soil Temperature : 0.1°C
Accuracy Soil Water Content : 3 %VWC (without Calibration)
Accuracy Soil Conductivity : ± 2%
Accuracy Soil Temperature : ± 0.5°C
Cable length : 1.8m or 6.1m (extendable to 15m)
Power requirements : 3 VDC @ 6 to 10 mA
Output signal : Analog 0 - 3 VDC (Time division multiplexed)
Sensing Area : 6,4cm x 2.9cm
The WaterScout SM100 Soil Moisture Sensor is a capacitance type sensor that measures Soil Moisture Content (%VWC). The sensor responds immediately to changes in Soil Moisture Content helping you to make better irrigation decisions. Under-watered plants suffer from nutrient deficiencies, stunting and wilting. Conversely, over-watered plants are more susceptible to disease pressure and less tolerant of dry conditions later on in their life cycle. Extreme over-watering will suffocate the plant and lead to root death.
Specifications:
Range Soil Water Content : 0 %VWC to saturation
Resolution Water Content : 0.1% VWC
Accuracy Soil Water Content : 3 %VWC (with an EC 8ms/cm¹)
Cable length : 1.8m or 6.1m (extendable to 15m)
Power requirements : 3-5 VDC @ 6 to 10 mA
Output signal : Analog 0,5 - 1.5 VDC (for a 3V excitation)
Sensing Area : 6,5 cm x 1.8 cm
The Watermark Soil Moisture Sensors is an established method of tracking soil moisture trends in crops, vineyards, or other areas where moisture level is a concern. Place sensors in the upper and lower thresholds of the root zone, in turf, or in other growing media. Reads soil moisture tension from 0 (saturated) to 200 (dry) centibars.
Specifications:
Range Soil Moisture Tension : 0 to 200 kPa (pF0 to pF 3.3)
Resolution Water Content : 0.1 kPa
Cable length : 3.3m or 7.6m
Power requirements : 3-5 VDC @ 6 to 10 mA
Output signal : Analog 0,5 - 1.5 VDC (for a 3V excitation)
Sensing Area : 6,5 cm x 1.8 cm